- Place of Origin: Hebei, China (Mainland)
- Brand Name: RONGAN
- Model Number: RW-CO21-1
- After-sales Service Provided: Engineers available to service machinery overseas
- Rock wool line capacity: 5000 ton/year
- Curing oven length: 21m
- Fuel: Gas, Coke, Diesel, ...
- Sections: 3 zones
- Flights speed: 0.76-7.6m/min
- Wool felt width: 1.34m
- Board width: 1200mm
- Board thickness: 30-120mm
- Density: 50-100kg/ m³
- End products KT value: ≤10000
Packaging & Delivery
|Packaging Details:||PE film, Container.|
|Delivery Detail:||60-90 days|
SpecificationsRock wool heat curing oven
Rockwool board curing oven
Patent curing oven design
Gas curing oven
Rock wool heat curing oven
I. Curing oven introduction
Heat curing oven is the key equipment in mineral wool production process. The raw blanket pleated by the upper and lower conveyors in board curing oven, and then heated and dried through hot air system. There are three sections. Finally, the raw blanket became the product with a certain weight and width. The heat curing oven equips with insulation layers for thermal insulation and moving doors for inside check.
Curing oven photos
II. Heat curing oven technical parameter
Curing oven length 21m
Rock wool line capacity 5000TPA
Sections 3 zones
Flights speed 0.76-7.6m/min
Effective width (inner) 1.34m
Board width 1200mm
Board thickness 30-120mm
Board density 50-100kg/ m³
End products KT value ≤10000
Lifting space 10-130mm
Lifting speed 2.57mm/min
Motor power 22kw
Lifting motor 5.5kw
III. Board curing oven composition
The curing oven consists of frame, transmission system, heat source system, air blast system and lifting system.
3.1 Frame is supporting the whole equipment, U-bar steel welded structure with enough strength and which is divided into upper and lower parts, and it also can make a lift adjusting by different technological requirements. Out of the frame equipped with thermal insulation layer for energy saving and there also movable doors on the two sides of curing oven, make the curing oven condition checking easy and convenient.
On the both ends of curing oven have a Φ700mm exhaust gas pipe, which is connected out of the plant roof and prepared rain cover.
3.2 Transmission System consists of driving shaft, driving chain belt, meshed chain plate, driving system and the chain tensioning section.
Curing oven driving system photo
Motor power 22KW
3.3 Hot blast furnace is the hot air to heating and forming the raw blanket.
3.4 Lifting system. Start the lifting motor and the product thickness can be adjusted through the up and down adjusting of the upper frame. The lifting speed will keep a slow state because of the lifting weight. The button box, lifting position limit ruler etc. It is installed at the exit doorframe of the curing oven.
IV. Curing oven in production
1.What the relationship between rock wool products density (K) and thickness (T)?
Theoretical thickness T (mm)
2.Where is the curing oven in the rock wool line?
|Buyer||Product Name||Price||Quantity||Order Time(GMT+8)|